When processing and producing bevel gears, it is very important to get the key points. Good key points can ensure its excellent characteristics.
What are the key points we need to pay attention to?
In the production and processing of gears, the most basic is the processing of teeth. However, apart from the processing of teeth, there are other methods for the production of transmission gears. According to the original
The way we produce and process is different for different materials. The main point of the quenching and tempering treatment of the transmission gear lies in the unfolding of the teeth after processing. Probably before the bevel gear is processed, for
In order to facilitate the removal of the pressure in the transmission gear blank, the normalizing treatment is done separately. The teeth of the transmission gear must have a lot of force to resist pressure in order to transmit
Spend. Mainly strength and ductility.
In order to exceed the regulations, raw materials can be selected according to the purpose of its use. In order to resist the damage of gears, the surface layer can be hardened and processed. Another student
In the production process, the surface processing tasks of bevel gear processing are indispensable. The parts of high-carbon steel and carbon steel are placed in the nitriding material and kept yielding.
The carbon element penetrates from the surface of the part at a temperature around the limit. When it is heat-treated, only a part of the nitriding part becomes hard, and the bevel gear can comply with the hydrogen nitriding time.
Length to adjust the thickness of the hard bottom layer.
Therefore, when developing bevel gear processing, these key points can not be ignored, and then we can think about everyone's manufacturing requirements.
Bevel gear processing and production welcome to consult our Hefa gear processing factory, we have 17 years of gear processing and production experience, mature quality control process, one-to-one
VIP service.
